(Español) News

HIDROSTANK has supplied its HIDROBOX attenuation crates (also known as Storm Cells, Soakaway Modules, and StormCrates) in the first ‚green’ pedestrian crossing in Pamplona (Navarra, Spain), a new sustainable proposal that also improves pedestrian safety. In response to the need to eliminate visual obstacles in the five metres before pedestrian crossings, Pamplona City Council has launched the first ‚green’ pedestrian crossing, a sustainable proposal that consists of creating a landscaped area in the space that would be occupied by the parking spaces before the crossings. This initiative guarantees pedestrian safety by increasing visibility at crossings and calming traffic, and enhances the value of this space gained from the car for pedestrian enjoyment and the improvement of urban quality. The ‚green model’ pedestrian crossing provides a nature-based solution to climate change adaptation by integrating a sustainable urban drainage system (SUDS) provided by a small non-irrigated garden. This ensures that rainwater is filtered into the ground, favouring its natural cycle and cleaning it before it returns to the aquifer, and prevents flooding by reducing runoff at times of heavy rainfall, which is becoming more frequent due to climate change. It also increases urban green space and its ability to cool the environment, which benefits people’s health and prevents the urban ‚heat island’ effect. HIDROSTANK has worked closely with the technicia

HIDROSTANK has recently supplied its innovative modular pullboxes at the Dumat Al Jandal wind farm, the first wind farm in Saudi Arabia and the largest in the Middle East when completed. The project has marked a key construction milestone with the arrival of 20 wind turbines at the port of Duba. The 400 megawatt MW wind power project is being developed by a consortium of EDF Renewables and Masdar. Construction began last August and commercial operations will start in the first quarter of 2022. HIDROSTANK have worked closely with the technicians of TSK, the awarded EPC, to define the best solution for the electrical &  telecommunication ducting access chambers. The Dumat Al Jandal wind farm will supply electricity under a 20-year power purchase agreement with Saudi Power Procurement Company, a subsidiary of Saudi Electricity Company, the Saudi power generation and distribution company. For several years, HIDROSTANK has been collaborating in the execution of photovoltaic, thermosolar and wind power plants, where the advantages of its cable pits (easy transport, handling and installation, combined with their high resistance) make it possible to meet, and in some cases shorten, the demanding execution deadlines. This project in Saudi Arabia joins the numerous projects already carried out in MIDDLE EAST as well as in EUROPE, LATAM, AFRICA and ASIA.

HIDROSTANK has just launched its new composite lids of its own manufacture The HIDROSTANK composite covers, EN124 B125 resistanct, offer numerous advantages versus traditional cast iron covers, such as Do not block the radio signal. The new HIDROSTANK composite covers allow the radio frequency signal to pass through, so that operators can easily install underground antennas to improve urban coverage. This makes them an ideal solution for 5G deployments* Electrical and temperature insulation No corrosion problems Less noise Solves theft problems   ACCESS CHAMBER REFERENCE Frame external dimensions (mm) Cover/s (mm) Model A58x58 648×648 633x633x19 AAG126x58 1286×648 (2) 633x633x19 A58x45 642×507 633x495x54 L1T AAG90x58 1004×642 (2) 633x495x54 ½ L4T AAG123x45 1278×507 (2) 633x495x54 L2T AAG135x58 1501×642 (3) 633x495x54 L3T AAG 194×58 1995×642 (4) 633x495x54 L4T Should you require more information please do not hesitate to contact to us.   *Current telecoms infrastructure needs to ramp up to address the forecasted tenfold growth in global mobile data traffic (by 2021). This is driving the requirement for increased mobile network densification and small cells. So, operators require more site options, which, in turn, create site acquisition challenges. Site approvals for locations in dense urban environments are getting increasingly difficult. Meanwhile, the requirements for camouflage and multi-application sites are continuously

Last Friday, February 7, the Road, Channel and Port Engineers Association of Madrid presented its XII Annual Awards 2019 to more than 600 guests, including numerous institutional representatives and top leaders of construction and engineering companies, at a gala held in the Crystal Gallery of the Cibeles Palace. The prize in the “Best Public Project” category was awarded to the “Wanda Metropolitano Stadium Environment”, an area of ​​action that covers an area of ​​more than 1,200,000 square meters in which the jury has highlighted “its environmental sustainability”. Hidrostank supplied its HIDROBOX infiltration boxes, enabling sustainable urban drainage management (SUDS).   The winning work has increased the provision of green spaces and infrastructure of the San Blas-Canillejas District, integrating the new Atlético de Madrid stadium into an accessible environment. The president of the club, Enrique Cerezo, has collected the prize in the company of the delegate of Works and Spaces of the City Council, Paloma García Romero, and representatives of FCC and IGB Ingeniería.   HIDROSTANK SUPPLIED ITS HIDROBOX ATTENUATION CRATES IN THE NEW ATLETICO DE MADRID STADIUM   In 2017 HIDROSTANK supplied its HIDROBOX attenuation crates in the urbanization works of Wanda Metropilitano, the new Atletico Madrid stadium, which was built by FCC. The inauguration was that September 16th.   Previosly the Madrid City Council, the Ministry of Development and Atlet

HIDROSTANK continues with the international commitment and will attend the next edition of the IFAT, the World’s Leading Trade Fair for Water, Sewage, Waste and Raw Materials Management, held from May 4 to May 8, 2020 in Munich.   IFAT meets for 5 days in MUNICH all the equipment, technologies and services specializing in the treatment of all types of pollution, environmental conservation and the implementation of sustainable development solutions.   HIDROSTANK presents its wide range of products for: Chanelling (innovate access chambers, manhole steps, clamps …), http://www.youtube.com/watch?v=7k6WbfKHZvk   Hydraulic equipment for stormtanks (flow regulators, flushing systems, pass screens, check valves) and, specially, http://www.youtube.com/watch?v=bEEEQCdr700   SUDS: its HIDROBOX attenuation crates for sustainable urban drainage systems (SUDS). https://www.youtube.com/watch?v=2QnhADIo_gw   In the stand A3.118 qualified staff will attend the demand of information that the visitor may need, using samples and models that facilitate understanding the functioning of the equipment.   Register now at: https://www.ifat.de/visitors/planning-your-visit/ticket-prices/index.html

ENEL (formerly CODENSA) and EPM, the two main Colombian electricity companies, have just approved the HIDROSTANK modular manholes for the new projects they plan to develop in Colombia.   HIDROSTANK has collaborated during the last years with the technicians of both companies to define the models for the cable ducting. HIDROSTANK did several pilot installations successfully that made possible the homologation of the following models:   ENEL – CS274 ENEL – CS275 ENEL – CS276   EPM: RS3-001 EPM: RS3-002 EPM: RS3-003 EPM: RS3-004 EPM: RS3-005 EPM: RS3-006   Enel is a multinational company in the energy sector and a leading integrated operator in the global electricity and gas markets, particularly focused on the markets in Europe and Latin America. Its subsidiary in Colombia, ENEL (formerly CODENSA) is the largest commercialization company of energy in the country, with a 25% participation, we provide electricity to more than 3.4 million customers in Bogotá and in more than 100 municipalities in Cundinamarca.   Hidrostank had already collaborated with ENEL GREEN POWER on several photovoltaic projects both in Europe and in Latin America.   Empresas Públicas de Medellín E.S.P., better known as EPM, is a Colombian group made up of companies that are located in Central America, Chile, Mexico, the United States, Spain and Colombia. They offer services of electric energy, natural gas, drinking water, basic sanitation, collection, use a

HIDROSTANK has recently supplied its innovative modular reinforced PP manholes at the Núñez de Balboa photovoltaic plant that IBERDROLA has built in Usagre (Badajoz)   According to the company’s website (https://www.iberdrola.com/conocenos/lineas-negocio/proyectos-emblematicos/planta-fotovoltaica-nunez-de-balboa), “the plant, which will have an installed capacity of 500 MWp (391 MW of maximum network connection power) after its entry into operation – planned for the first quarter of 2020 – will supply clean energy to 250,000 people, more than the population of the cities of Cáceres and Badajoz, thus avoiding the emission to the atmosphere of 215,000 tons of CO2 per year. ”   HIDROSTANK have worked closely with the technicians of the awarded EPC company to define the best solution for the telecommunications & CCTV ducting.   For several years, HIDROSTANK has been collaborating in the execution of solar and solar plants, where the characteristics and advantages of its manholes (its easy installation and handling, together with its great resistance) enable to fulfil, and in some cases shorten, the demanding deadlines of execution.   This project joins the numerous projects already carried out in EUROPE, LATAM, AFRICA and MIDDLE EAST

HIDROSTANK has supplied its HIDROBOX attenuation crates (also known as Storm Cells, Soakaway Modules, and StormCrates) in the UE7B urbanization „Ronda Sur” in Cobeña, Madrid   HIDROSTANK has worked closely with the technicians of both the construction management and the awarded construction company in the definition of the solution finally adopted.   The proposal, which had the prior approval of the Canal de Isabel II (public company in charge of the integral water cycle in the Community of Madrid) consisted of two tanks of 830 and 80 m3   The ease of assembly of HIDOBOX infiltration crates, certified by Bureau Veritas, enabled a very rapid installation of the tanks.   Its modularity enables, not only to optimize both transport and storage at destination, but also a dimensioning according to the requirements of each project.   https://www.youtube.com/watch?v=2QnhADIo_gw https://www.youtube.com/watch?v=ka5uIwbCMr4

HIDROSTANK has recently supplied its PAS-type weir screens at the WWTP in Aranjuez, Madrid.   Although the theoretical capacity of the original Aranjuez WWTP had not been exceeded in terms of flows, the increased pollutant load with respect to the design scenario and the more stringent requirements, made it impossible for the existing plant to achieve compliance.   As a result, Canal de Isabel II decided to undertake the necessary actions to ensure compliance with the targets set in the National Water Quality Plan.     HIDROSTANK has worked closely with the technicians of both the promoter of the WWTP (Canal de Isabel II, S.A.) and the awarded joint venture (GS Inima-Asteisa) and the technical assistance of Técnicas Reunidas, in the definition of the solution finally adopted.   Hidrostank designs, manufactures and installs PA- type weir screens, one of which is installed at the Aranjuez WWTP. These screens have a high solids retention capacity and a simple, effective cleaning system. The screens feature a perforated grid of 5 or 6 mm in diameter, incorporating a pump that sends a jet of water through an ejector to keep the perforated grid clean. The pump has a cover that enables maintenance operations from the outside, differentiating the unit from competing products.   PAS type screens can be installed in new facilities or retrofitted to existing weirs. For retrofitting purposes, they can be dismounted through a single cover of 80×80 cm an