News

HIDROSTANK will be present at the next edition of the SMAGUA to be held in ZARAGOZA from 4th to 7th of March It will be the 21st edition of the International Water Exhibition, a very important meeting for water and environment industries, not only in our country but in Europe, to be a showcase of solutions for integrated water management . Hidrostank presents its wide range of products for: Chanelling: innovate modular access chambers, manhole steps, pipe clamps…, http://www.youtube.com/watch?v=7k6WbfKHZvk Hydraulic equipment for stormtanks: flow regulators, cleaning systems(tipping buckets, flushing gates, vacuum systems, jet cleaners…), pass screens…,  http://www.youtube.com/watch?v=bEEEQCdr700 and, specially, the last bet of Hidrostank for Sustainable Urban Drainage (SUDS): the HIDROBOX infiltration cells, that allow the dimensioning of  infiltration basins(recharge basin), detention basins, percolation trenches …. http://www.youtube.com/watch?v=2QnhADIo_gw In the stand Hall 4 D / 5 qualified staff will attend the demand of information that the visitor may need, using samples that facilitate the understanding the products On Wednesday, March 5th at 10.30, our manager Alberto Ayesa will give an introductory lecture on Sustainable Urban Drainage Systems (SUDS).

HIDROSTANK continues with the international commitment and will attend the next edition of the FISE to be held in MEDELLÍN from 27th to 29th of November FISE has specialized as a business and academic meeting for exhibitors , visitors and public sector , for framing the policies, trends , vision and challenges of the electricity industry . In this 5th edition distributors, contractors and installers seek new business opportunities, both nationally and internationally. HIDROSTANK presents its innovative reinforced polypropylene modular cable pits specially oriented to electrical and telecommunication netwoks, existing in projects as: • Civil works: highways, roads, airports, railways … • Urbanization, Industrial estates … • Photovoltaic Projects In Colombia HIDROSTANK has done very successful demo installations with PROMITEL and CODENSA . In the BLUE Pavillion , AZ- 002 STAND Hidrostank staff meet the demand of information that the visitor might need with the help of samples to facilitate understanding of the benefits of Hidrostank chambers in comparison to traditional concrete and brick ones: • Assembling: http://www.youtube.com/watch?v=6HjPJU4q6xg • Installation: http://www.youtube.com/watch?v=7k6WbfKHZvk

This year HIDROSTANK has supplied their HIDROBOX infiltration cells in a project in Leeuwarden, Netherlands HIDROSTANK worked closely with technicians from the contractor in the definition of the solution finally adopted. The modularity and ease assembling of HIDOBOX infiltration cells, certified by Bureau Veritas, enabled a very quick installation of the infiltration tanks: • Deposit 1. 37 m3, model Hidrobox 2.1, non inspectable • Deposit 2: 150 m3, model Hidrobox 2.1, inspectable, 3 inspectable channels The tank 2 was designed with 3 inspectable channels to facilitate maintenance. The innovative polypropylene HIDROSTANK access chambers were used in the access to the channels: Netherlands is one of several countries where HIDROSTANK is selling their HIDROBOX as a solution for the infiltration of rainwater wherever possible to enable a sustainable urban drainage (SUDS):

HIDROSTANK is providing its innovative reinforced polypropylene Access chambers (cable pits) in the “Amanecer Solar CAP” ( Llano de Llampos ) PV plant, that is developed about 30 kilometers from Copiapó, Chile The project, with an investment of $ 250 million , involves the installation of 300,000 solar panels with azimuthal tracker , over an area of 266 hectares . The installed capacity is 100 MW and in a year will be able to inject 270 GW / h of energy to the Central Interconnected System ( SIC ) , which prevent the emission of 135,000 tons of CO2 into the environment. HIDROSTANK has worked closely with both the developer and the EPC company technicians supplying its innovative cable pits, providing the best solution for channeling electrical installations. For several years HIDROSTANK cooperates in the execution of ground mounted solar farms and thermosolar projects, all over the world. The features and benefits of our access chambers (easy installation and handling, with its great resistance) enable the EPC to fulfil, even shorthen in some cases, the demanding deadlines. This project joins the already performed in Europe, LATAM, Africa, Asia… Find attached 2 videos of the:  assembling      http://www.youtube.com/watch?v=6HjPJU4q6xg installation:      http://www.youtube.com/watch?v=7k6WbfKHZvk

HIDROSTANK has just launched a new manhole step HIDROSTEP (P006), own made, to replace the recycled plastic we imported so far (P202). This model complements the 5 models that HIDROSTANK been manufacturing since its begining (P001 to P005) The HIDROSTEP comes from the conviction to offer products of own manufacture, high quality and cost-effective. HIDOSTANK manhole steps are manufactured with corrugated AEH 500 steel rod that is 12 mm thick, covered by virgin co-polymer polypropylene with high impact resistance to prevent breakage during installation. HIDROSTANK manhole steps are totally resistant to abrasion and corrosion because the rod is covered by means of a system with an exhaustive quality control. HIDROSTANK manhole steps have anti-slip grooves and side stops to prevent from falling.

Unfortunately more and more frequent thefts of cast iron covers, with consequent economic damage and safety risks.   For several years HIDROSTANK is offering the use of composite covers to both: new civil works, where plastic frame and cover are supplied, as in cases of existing works where the cover has been stolen. For this case, Hidrostank proposesr a customized cover that enables reuse the existing framework (mínimum order required).   Besides reducing thefts, plastic covers offer better ergonomics, increase pedestrian safety (as it is a non-conductive material) and are more resistant to corrosion   Also, since not shielded by the radio signal, can allow remote capture information.

This year HIDROSTANK has supplied its innovative reinforced polypropylene access chambers in several PV plants built in UK: BEACHAMPTOM, HATCHLANDS, RUDGE, TREFINNICK, SHIPTON BELLINGER, PARKHOUSE… HIDROSTANK has worked closely with technicians of the corresponding EPC, with the supply of its innovative manholes, providing the best solution for electrical channelling. For several years HIDROSTANK cooperates in the execution of groun mounted solar and thermosolar projects, where the features and benefits of our access chambers (easy installation and handling, coupled with its great strength) enable the EPC to fulfil, even shorthen in some cases, the demanding deadlines: http://www.youtube.com/watch?v=7k6WbfKHZvk This project joins the already performed in Spain, Portugal, France, Italy, Czech Republic, Romania, Peru …

Last April HIDROSTANK supplied and installed their HIDROBOX infiltration cells in the project of the “Rehabilitation of The Catte neighborhood” in Bergerac, France.   HIDROSTANK worked closely with technicians from the contractor in the definition of the solution finally adopted.   The modularity and ease assembling of HIDOBOX infiltration cells, certified by Bureau Veritas, enabled a very quick installation of the 100m3 infiltration tank. The work was carried out for 2 days for 4 workers, as you can see in the videos below:   https://www.youtube.com/watch?v=2QnhADIo_gw https://www.youtube.com/watch?v=ka5uIwbCMr4   The tank was designed with 2 inspectable channels to facilitate maintenance. The innovative polypropylene HIDROSTANK access chambers were used in the  access to the channels:   https://www.youtube.com/watch?v=vc2amIdqJuM     France is one of several countries where HIDROSTANK is selling their HIDROBOX as a solution for the infiltration of rainwater wherever posible to  enable a sustainable urban drainage (SUDS).

HIDROSTANK, S.L. is supplying pipe separators in the construction of the new high voltage power line of 64.5 km linking Spain and France through the Pyrenees and will be operational by 2014. The Inelfe project, 50% subsidiary of Spain’s Red Electrica (REE) and its French counterpart Réseau Transport d’Electricité (RTE), has a budget of 700 million euros and is funded by the European Union as part of the EEPR program (European Energy Programme for Recovery). Should double the current interconnection capacity between the two countries in 1400 to about 2,800 megawatts. Hidrostank, SL has worked closely with technicians from the awarded companies and  developed a cable separator  to the required pipeline prism.