Noticias

HIDROSTANK has just launched a new manhole step HIDROSTEP (P006), own made, to replace the recycled plastic we imported so far (P202). This model complements the 5 models that HIDROSTANK been manufacturing since its begining (P001 to P005) The HIDROSTEP comes from the conviction to offer products of own manufacture, high quality and cost-effective. HIDOSTANK manhole steps are manufactured with corrugated AEH 500 steel rod that is 12 mm thick, covered by virgin co-polymer polypropylene with high impact resistance to prevent breakage during installation. HIDROSTANK manhole steps are totally resistant to abrasion and corrosion because the rod is covered by means of a system with an exhaustive quality control. HIDROSTANK manhole steps have anti-slip grooves and side stops to prevent from falling.

Unfortunately more and more frequent thefts of cast iron covers, with consequent economic damage and safety risks.   For several years HIDROSTANK is offering the use of composite covers to both: new civil works, where plastic frame and cover are supplied, as in cases of existing works where the cover has been stolen. For this case, Hidrostank proposesr a customized cover that enables reuse the existing framework (mínimum order required).   Besides reducing thefts, plastic covers offer better ergonomics, increase pedestrian safety (as it is a non-conductive material) and are more resistant to corrosion   Also, since not shielded by the radio signal, can allow remote capture information.

This year HIDROSTANK has supplied its innovative reinforced polypropylene access chambers in several PV plants built in UK: BEACHAMPTOM, HATCHLANDS, RUDGE, TREFINNICK, SHIPTON BELLINGER, PARKHOUSE… HIDROSTANK has worked closely with technicians of the corresponding EPC, with the supply of its innovative manholes, providing the best solution for electrical channelling. For several years HIDROSTANK cooperates in the execution of groun mounted solar and thermosolar projects, where the features and benefits of our access chambers (easy installation and handling, coupled with its great strength) enable the EPC to fulfil, even shorthen in some cases, the demanding deadlines: http://www.youtube.com/watch?v=7k6WbfKHZvk This project joins the already performed in Spain, Portugal, France, Italy, Czech Republic, Romania, Peru …

Last April HIDROSTANK supplied and installed their HIDROBOX infiltration cells in the project of the “Rehabilitation of The Catte neighborhood” in Bergerac, France.   HIDROSTANK worked closely with technicians from the contractor in the definition of the solution finally adopted.   The modularity and ease assembling of HIDOBOX infiltration cells, certified by Bureau Veritas, enabled a very quick installation of the 100m3 infiltration tank. The work was carried out for 2 days for 4 workers, as you can see in the videos below:   https://www.youtube.com/watch?v=2QnhADIo_gw https://www.youtube.com/watch?v=ka5uIwbCMr4   The tank was designed with 2 inspectable channels to facilitate maintenance. The innovative polypropylene HIDROSTANK access chambers were used in the  access to the channels:   https://www.youtube.com/watch?v=vc2amIdqJuM     France is one of several countries where HIDROSTANK is selling their HIDROBOX as a solution for the infiltration of rainwater wherever posible to  enable a sustainable urban drainage (SUDS).

HIDROSTANK, S.L. is supplying pipe separators in the construction of the new high voltage power line of 64.5 km linking Spain and France through the Pyrenees and will be operational by 2014. The Inelfe project, 50% subsidiary of Spain’s Red Electrica (REE) and its French counterpart Réseau Transport d’Electricité (RTE), has a budget of 700 million euros and is funded by the European Union as part of the EEPR program (European Energy Programme for Recovery). Should double the current interconnection capacity between the two countries in 1400 to about 2,800 megawatts. Hidrostank, SL has worked closely with technicians from the awarded companies and  developed a cable separator  to the required pipeline prism.

Hidrostank was present at the POLLUTEC 2012 held in LYON at the end of last year From 27 to 30 November Pollutec had more than 60,000 visitors, 13% of international visitors belonging to 105 countries, who were interested in a wide range of products and services for the prevention and treatment of all types of pollution and conservation. HIDROSTANK presents its wide range of products for: Chanelling (innovate access chambers, manhole steps, clamps …), highlighting the L1T access chamber with the France Telecom approval Hydraulic equipment for stormtanks (flow regulators, flushing systems, pass screens) and, specially, SUDS: its infiltration cells for sustainable urban drainage systems (SUDS): Soakaways, Infiltration trenches, Infiltration basins, Detention basins…

HIDROSTANK, SL has supplied its innovative reinforced polypropylene in several PV plants built in MICESTI, DABULENI, SEBIS…   Hidrostank, SL has worked closely with technicians of the correspondingEPC, with the supply of its innovative manholes, providing the best solution for electrical channeling.   For several years HIDROSTANK cooperates in the execution of greenfield solar and thermosolar projects, where the features and benefits of our access chambers (easy installation and handling, coupled with its great strength) enable the EPC to fulfil, even shorthen in some cases, the demanding deadlines.   This project joins the already performed in Spain, France, Italy, Czech Republic, Inited Kingdom, Peru …

EXITOSA INSTALACION DEL IMBORNAL MODELO EMATSA EN TARRAGONA HIDROSTANK, S.L. suministró el año pasado varios imbornales sifónicos para que EMATSA procediera a realizar una instalación donde pudiera comprobar tanto su facilidad en la instalación como una mejor calidad en el acabado. Personal de Hidrostank estuvo en contacto con técnicos del departamento de operaciones de EMATSA para poder definir un imbornal sifónico de que satisficiera los requerimientos técnicos de EMATSA y aportara los beneficios del sistema constructivo HIDROSTANK. Finalmente se instalaron varias unidades del imbornal sifónico de 100×50 cm tipo EMATSA en la obra de la calle Maria Cristina de Tarragona, donde se pudieron comprobar las ventajas comparativas respecto a los sistemas tradicionales: • Fácil y rápida instalación: manipulación manual, sin maquinaria pesada. • Versatilidad: posibilidad de hacer las acometidas en obra, de recrecer la arqueta… • Un producto de calidad: acometidas a medida, sin coqueras ni rebabas

Hidrostank estuvo presente en la feria de IFAT ENTSORGA que se celebró en MUNICH del 7 al 11 de Mayo, edición record en la que un total de 2.939 expositores de 54 países recibieron a 125,000 visitantes de 180 países. Englobadas todas dentro del sector de la Obra Civil, HIDROSTANK presentó sus dos líneas de negocio tradicionales (Canalización e Hidráulica) así como su última apuesta: la celda de infiltración HIDROBOX para un drenaje urbano sostenible(SUDS) HIDROSTANK Canalización: Por un lado, HIDROSTANK Canalización expuso sus innovadoras Arquetas auto-resistentes de Polipropileno reforzado, tapas plásticas con resistencia hasta 40 Tn., pates de polipropileno, grapas… Las arquetas Hidrostank pueden ser utilizadas para todo tipo de canalizaciones: eléctricas (homologadas por Endesa, Iberdrola, CFE), telecomunicaciones (Telefónica, France Telecom), hidráulicas (imbornales, saneamiento, abastecimiento), gas, geotermia… La utilización de estas innovadoras arquetas optimiza sensiblemente el rendimiento en obra al reducir tanto el tiempo de instalación, como la mano de obra y maquinaria necesarias. Su gran resistencia, avalada por los ensayos realizados por laboratorios independientes de reconocido prestigio, su versatilidad (en dimensiones, acometidas…), y su acabado, suponen un gran avance a los métodos tradicionales de canalización. Han sido muchas las administraciones y las empresas que han apostado por el empleo de estas arquetas en proyectos de: